HP Touchpad Hardware [Preliminary]

Although this is an article on hardware, I'm going to be using software to probe it. This is from a 32GB HP Touchpad, though the 16GB should be the same, barring the difference in storage.

/proc/cpuinfo:

Processor       : ARMv7 Processor rev 2 (v7l)
processor       : 0
BogoMIPS        : 13.52

Features        : swp half thumb fastmult vfp edsp neon vfpv3
CPU implementer : 0x51
CPU architecture: 7
CPU variant     : 0x0
CPU part        : 0x02d
CPU revision    : 2

Hardware        : TENDERLOIN
Revision        : 0000
Serial          : 0000000000000000

The touchpad runs on a Qualcomm Snapdragon dual-core CPU, so I would take this output with a grain of salt: It's only showing one core, and my touchpad is in powersave mode, so the bogomips, as usual, is way off.

Now for the more interesting stuff, like i2c devices.

cat /sys/bus/i2c/devices/*/name: (with annotations)

mt9m113- Aptina Webcam SoC

  • /sys/devices/i2c-1/1-0078

a6_0 - Battery monitor - Battery?

  • /sys/devices/i2c-3/3-0031
  • This one seems to have information on voltage, charge percentage, etc.
  • Seems to be the battery monitor
  • Here are the values/categories for the Veer (for comparison and info)
  • A6 Version: HW: 255, FW (M.m.B): 2.13.25, ManID: 28769, ProdTyp: 1281

a6_1 - Battery monitor - Charger?

  • /sys/devices/i2c-3/3-0032
  • This one has info in acc_data_*, but not voltage
  • Seems to be the battery charging circuit
  • A6 Version: HW: 255, FW (M.m.B): 2.7.23, ManID: 28769, ProdTyp: 1793

LM8502- National Semiconductor "Smart Lighting" IC

  • /sys/devices/i2c-3/3-0033
  • Fun: The LM8502 driver brings out the vibrator, LEDs (home button LEDs?), flash (for camera? I dont' think the TP has one),

wm8958- Wolfson Microelectronics Audio Hub w/ 3 Digital Audio interfaces & DSP

  • /sys/devices/i2c-4/4-001a
  • Fun: Driver brings out some GPIO pins

maXTouch- Atmel's family of "Unlimited-Touch" Touchscreen controllers

pm8058-core - Qualcomm Power Management IC

  • /sys/devices/i2c-6/6-0055
  • The datasheet for this one is kept under wraps?
  • From what the driver brings out, we can see that it controls power to the charger, GPIO, MPP (Multi-Purpose Pins), PWM, Power button, RTC, TM (IC Temperature Monitor), UPL(?), and the vibrator

pm8901-core - Qualcomm Power Management IC (No datasheet?)

  • /sys/devices/i2c-7/7-0055
  • The datasheet for this one is kept under wraps?
  • The driver brings out MPP (Multi-Purpose Pins), regulators, and a Temperature Monitor.
  • (Maybe this one is used for large loads, whereas the pm8058 is for smaller loads?)

QUP I2C adapter - (Six) - Qualcomm Universal Peripheral [cite]

  • /sys/devices/i2c-0 all the way through i2c-5

MSM SSBI adapter - (Three) - Qualcomm MSM-series "Single-Wire Serial Bus Interface" [cite]

  • /sys/devices/i2c-6 through i2c-8

cat /etc/fstab:

  • # <filesystem>  <mount point>   <type>  <options>       <dump>  <pass>
  • rootfs  /       ext3    ro,suid,dev,exec,auto,nouser,async,noatime      1       1
  • /dev/mapper/store-var   /var    ext3    noatime,data=writeback  0       0
  • /dev/mapper/store-cryptodb      /var/db ext3    noauto,noatime,data=ordered     0       0
  • /dev/mapper/store-cryptofilecache       /var/file-cache ext3    noauto,noatime,user_xattr       0       0
  • /dev/mapper/store-log   /var/log        ext3    noatime 0       0
  • /dev/mapper/store-update        /var/lib/update ext3    noauto,noatime  0       0
  • proc    /proc   proc    defaults        0       0
  • devpts  /dev/pts        devpts  mode=0620,gid=5 0       0
  • tmpfs   /tmp    tmpfs   size=40M,mode=1777      0       0
  • tmpfs   /var/run        tmpfs   size=16M,mode=1777      0       0
  • tmpfs   /var/tmp        tmpfs   size=32M,mode=1777      0       0
  • tmpfs   /media/ram      tmpfs   defaults        0       0
  • /dev/mapper/store-media /media/internal vfat    utf8,shortname=mixed,umask=0000 0       0

/dev/input/event0 is the home button and volume button device
/dev/input/event1 is the power button device
/dev/bt_uart is the Bluetooth serial stream

/proc/tty/drivers: (showing some promising signs of USB-Host ability)

/dev/tty             /dev/tty        5       0 system:/dev/tty
/dev/console         /dev/console    5       1 system:console
/dev/ptmx            /dev/ptmx       5       2 system
/dev/vc/0            /dev/vc/0       4       0 system:vtmaster
usbserial            /dev/ttyUSB   188 0-253 serial
acm                  /dev/ttyACM   166 0-31 serial
msm_serial_hsl       /dev/ttyS     243 0-3 serial
pty_slave            /dev/pts      136 0-1048575 pty:slave
pty_master           /dev/ptm      128 0-1048575 pty:master
pty_slave            /dev/ttyp       3 0-255 pty:slave
pty_master           /dev/pty        2 0-255 pty:master
smd_tty_driver       /dev/smd      253 0-36 serial
unknown              /dev/tty        4 1-63 console

More to come.

Trackback URL for this post:

http://erroraccessdenied.com/trackback/1690